Honeywell HEN04111 User Manual Download Page 51

Page: 51 / 248

NVR Configurations | 51

800-18160 - A - 06/2014

HDD Information

Figure 3-11

HDD Information Tab

This page shows the hard disk type, the total space, the free/available space, and the status of
the HDD. You can have up to two HDDs.

Note

If the disk is damaged, you will see ? in the Status column. Remove the broken
disk before adding a new one.

Viewing the HDD Recording Time Information

Click

View recording time

in the

HDD INFO

interface. The HDD recording time interface for the

selected HDD appears.

Table 3-6

HDD Drive Status Symbols

Symbol

Meaning

The currently selected HDD is normal.

There is no HDD.

The disk is damaged.

Summary of Contents for HEN04111

























































































































































































































































Search results

Summary of Contents for HEN04111

Reviews:

Related manuals for HEN04111

Brands by name

Popular brands

Honeywell HEN04111, User Manual

Search results

Summary of Contents for HEN04111

Reviews:

Related manuals for HEN04111

Brands by name

Popular brands