Honeywell HEN04111 User Manual Download Page 107

Page: 107 / 248

NVR Configurations | 107

800-18160 - A - 06/2014

Configuring PTZ Settings

Note

All the operations here are based on the PELCOD protocol. For other protocols,
there might be slight differences.

Cable Connection Before You Begin

Ensure that the following are connected:

•

Connect the camera’s RS485 port to the NVR’s 485 port.

•

Connect the camera’s video output cable to the NVR’s video input port.

•

Connect the power adapter to the camera.

Before You Begin PTZ Configuration

Ensure that:

•

The PTZ and decoder connection is correct, and that the decoder address configuration is
correct.

•

The decoder’s A (B) line connects with the NVR’s A (B) line.

Note

The camera video should be in the current screen for configuring Pan/Tilt/Zoom
settings.

Configuring PTZ Settings

Click the

PAN/TILT/ZOOM

icon

in the

Setting

interface to open the

Pan/Tilt/Zoom configuration interface.

Summary of Contents for HEN04111

























































































































































































































































Search results

Summary of Contents for HEN04111

Reviews:

Related manuals for HEN04111

Brands by name

Popular brands

Honeywell HEN04111, User Manual

Search results

Summary of Contents for HEN04111

Reviews:

Related manuals for HEN04111

Brands by name

Popular brands