Honeywell HEN04101(X) User Manual Download Page 59

Page: 59 / 240

NVR Configurations | 59

800-18160 - B - 07/2014

Opening the Packets

Use software such as Wireshark to open the packets on the PC so that

a professional engineer can solve the problem.

Network Load

Click the

NET LOAD

on the

Network Information

configuration interface.

View and follow the statistics for the device’s network adapter.

Click to select a network adapter in the found network adapters table.

Figure 3-21

Network Load Interface

The flow statistics such as send rate and receive rate appear in the top panel.

Settings

In the

Main Menu

, highlight the

Setting

icon, and double-click your mouse. The

Setting

interface appears.

Click here.

Statistics
appear here.

Summary of Contents for HEN04101(X)

















































































































































































































































Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands

Honeywell HEN04101(X), User Manual

Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands