Honeywell HEN04101(X) User Manual Download Page 39

Page: 39 / 240

800-18160 - B - 07/2014

NVR Configurations

This chapter includes:

•

Logging into the NVR.

•

An overview of the NVR GUI, including live viewing, searching, and playing back.

•

Instructions on configuring the NVR.

Logging In to Your NVR

Before you can open the GUI for your NVR, you must do the following:

Connect your NVR to a monitor.

Connect the mouse and power cable to the NVR.

Click the power button on the NVR’s rear panel to turn on the NVR.

The NVR will boot up and you will see the GUI, which is in multiple-channel display mode,
and the default mode.

Summary of Contents for HEN04101(X)

















































































































































































































































Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands

Honeywell HEN04101(X), User Manual

Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands