Honeywell HEN04101(X) User Manual Download Page 33

Page: 33 / 240

800-18160 - B - 07/2014

Installation

This chapter includes:

•

An overview of connections for alarms and bi-directional communication.

•

Instructions for HDD installation.

•

Network connections.

Alarm Connection

Connect the alarm input device to the alarm input port.

Connect the alarm output device to the alarm output port. The NO and NC alarm output
device can connect to the NO/C/NC port.

•

For the NO alarm device, please connect to the NO/C ports.

•

For the NC alarm device, please connect to the NC/C ports.

Note

The NO/C ports are for NO alarm devices only.

Alarm Configuration

Open the web client, login, and go to the

Alarm

setup interface to set the alarm input and

output (

Configuring Alarms on page 90

). The alarm setting

corresponds to the device’s

first channel I/O port (and so on).

Set the NO/NC type according to the high/low level the alarm input device generates when
an alarm occurred.

See

Figure 3-47

page 91

Set the alarm output on the web client. See

Configuring Alarm Output on page 154

. The

alarm output setting

corresponds to the first group of the alarm output port.

Summary of Contents for HEN04101(X)

















































































































































































































































Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands

Honeywell HEN04101(X), User Manual

Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands