User Manual of Explosion-Proof Bullet Camera
44
detection. Refer to
Section
5.2.1 Configuring Motion Detection
6.
Click
tab to select the linkage method taken for the audio input exception,
Notify Surveillance Center, Send Email, Trigger Alarm Output and Trigger Recording are
selectable. Refer to
Section
5.2.1 Configuring Motion Detection
7.
Click
to save the settings.
5.3.2
Configuring Intrusion Detection
Intrusion detection can set an area in the surveillance scene and once the area is entered, a set
of alarm action is triggered.
Steps:
1.
Enter the intrusion detection interface:
Configuration > Events > Smart Event >Intrusion Detection
2.
Check the
Enable Intrusion Detection
checkbox.
Figure 5-21
Configuring Intrusion Area
3.
The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the intrusion detection interface. Optionally, you can click the
button to manually activate the movement, or lock the movement
