User Manual of Explosion-Proof Bullet Camera
21
Figure 4-10
Calling a Preset
4.4.5
One-touch Patrol
Purpose:
One-touch patrol is an automatically created patrol. The system automatically add preset No.1 to
No.32 to the patrol path 8. You can call the one-touch patrol and the camera moves as the patrol
path 8 automatically.
Steps:
1.
Set preset No.1 to No.32. Refer to
4.4.3 Setting/Calling a Preset
setting preset.
2.
Call preset No. 45, and the camera moves as patrol path 8.
3.
Click
to enter the patrol settings interface and start/stop one-touch patrol, edit the
patrol time and the speed.
4.
You can click
of the PTZ control panel to start one-touch patrol.
Figure 4-11
Patrol Path 8
