40X ZOOM IR PTZ DOME CAMERA USER GUIDE
46
The UPnP protocol is used to detect network devices with clients running Windows.
To enable UPnP, select the Enable check box. The camera can now be detected by
Windows' built-in network browser (My Network Places in Windows XP; Network in
Windows 7).
To enable UPnP in Windows XP:
1.
Go to
Start
Control Panel
Add or remove programs
.
2.
Click
Add or remove programs
, then select
Networking Services
in the
Windows Components Wizard.
3.
Click
Details
, then select
Internet Gateway Device Discovery
and
Control
Client and UPnP User Interface
.
4.
Click
OK
to begin the installation.
To enable UPnP in Windows 7:
1.
Go to
Start
Control Panel
Network and Internet
Network and Sharing Center
.
2.
On the left pane, click
Change advanced sharing settings
.
3.
On your current network profile, in the
Network discovery
area, click
Turn on
network discovery
, and then click
Save changes
.
Configuring SNMP
You can configure Simple Network Management Protocol (SNMP) settings on the
Setting
Network
SNMP
page.