40X ZOOM IR PTZ DOME CAMERA USER GUIDE
31
Zoom Prio
: It can auto adjust the brightness of IR light according to the actual
zoom rate.
SmartIR
: The device can control IR light brightness according to the actual zoom
rate and overexposure.
Manual
: It is to set the brightness value of IR light manually.
Off:
Illuminator is off.
Defog
To enable the defog function, set Mode to OFF, Manual, or Auto.
Auto:
The defog function is enabled automatically when the scene is obscured by
fog or haze.
Manual:
The defog function is always enabled.
If Mode is set to Manual, set Intensity to Low, Medium, or High. Click Save to apply
the settings.
Managing Profiles
After you have configured the camera properties for each profile (Normal, Day, Night), you
can set the profile(s) that you want the system to use on the
Setting
Camera
Conditions
Profile Management
page.
Next to Profile Management, select Normal, Full Time, or Schedule. By default, the system
has the Day profile always enabled.
Normal:
The Normal profile is always enabled.
Full Time:
The Day profile or Night profile is always enabled, depending on your selection.
Schedule:
The system switches between the Day profile and Night profile. Drag the sliders
on the left and right sides of the timeline to set the Night-to-Day and Day-to-Night
switching times.
Click
Save
to apply the settings.