40X ZOOM IR PTZ DOME CAMERA USER GUIDE
19
To set PTZ limits:
8.
Using the PTZ controls below the preview window, move the camera to the upper tilt limit
and then, next to
Up Line
, click
Setting
.
9.
Move the camera to the lower tilt limit and then, next to
Down Line
, click
Setting
.
10.
Select the
Enable
check box to enable the tilt limit function.
After the function is enabled, click
Live
to go to the upper or lower tilt limit.
Configuring Time Tasks
You can set up the camera to perform specific actions only within a specified period.
To set up a time task:
1.
In the
Time Task
area, select the
Enable
check box.
2.
Select the time task that you want to configure from the
Time Task No.
list. You
can configure up to 4 time tasks.
3.
Next to
Time Task Action
, select the action that you want the camera to perform
during the specified period. Click
Preset
,
Tour
,
Auto Scan
, or
Pattern
.
4.
Set
AutoHome
to a value between
5
to
3600
seconds. This is the waiting period
after a time task is interrupted (by manually calling the camera), after which the
time task resumes.
5.
Click
Period setting
. The
Setup
window opens.