40X ZOOM IR PTZ DOME CAMERA USER GUIDE
18
1.
In the
Idle Motion
area, select the
Enable
check box.
2.
Next to
Idle Motion
, select the action that you want the camera to perform when it is idle
for the specified time. Click
Preset
,
Tour
,
Scan
, or
Pattern
.
3.
In the Idle Time box, enter the time that the camera must be idle before the specified
action is performed. Enter a value between 1 and 60 minutes.
4.
Click Save to apply the settings.
Configuring PowerUp Settings
You can set up the camera to perform a specific action when it is powered up.
To enable PowerUp settings:
5.
In the
PowerUp
area, select the
Enable
check box.
6.
Next to
PowerUp
, select the action that you want the camera to perform when it is
powered up. Click
Preset
,
Tour
,
Scan
,
Pattern
, or
Auto
. If
Auto
is selected, the camera
will go to its last position before it was powered down.
7.
Click
Save
to apply the settings.
Configuring PTZ Limits
You can set upper and lower PTZ limits for the camera.