40X ZOOM IR PTZ DOME CAMERA USER GUIDE
90
Deleting a Group
You can delete any custom group that you have created (you cannot delete the
administrator group or the user group).
To delete a group:
1.
On the
Group
tab, select the group that you want to delete (your selection will be
highlighted yellow), and then click the
Delete
icon .
2.
A confirmation message appears. Click
OK
to continue. The group is removed from
the list.
Default
You can reset the camera to its factory default settings on the
Setting
System
Default
page.
Note
Some configuration information, including the IP address, will be lost when the
camera reverts to its factory default settings.
To reset the camera:
1.
Click
Default
.
2.
A confirmation message appears. Click
OK
to continue. The camera reboots
automatically and reverts to its factory default settings.
To reset the camera to the factory default:
1.
Click
Factory Default
.
2.
A confirmation message appears.
3.
Enter the password and the camera reboots automatically and reverts to its
factory default settings.
Import/Export
You can back up or restore configuration settings on the
Setting
System