Honeywell HDVR, Reference Manual

Page: 25 / 238

HRDV Reference Guide
Rev 1.00 7 Document 900.0261
04/05
The front panel control buttons have different functions in Operating mode (daily
operation). See
Table 15-1 . For further information, see Chapter 15, Daily Operation
Overview .
Text Entry Screen
Some Program screens have boxes where you can change the text (for example, the title
of a new report, or the camera title). To change the text in these boxes, highlight the box,
then press
Enter . A Text Entry screen displays.
The text you are changing is shown at the top of the Text Entry screen. The individual letter
you are currently changing is highlighted. To move between letters, use the arrow buttons
at the bottom of the Text Entry screen. Use the control buttons on the front panel to move
to the different buttons on the Text Entry screen. To use a button, move to it, then press
Enter on the front panel.
Camera 1 • Select camera 1
• Mark a clip for archiving
Camera 2 • Select camera 2
• Select all clips for archiving
Jog wheel • Enter values during Program mode.
• Select clips
• Set clip playback speed. Clip speed options are:
• Forward or reverse at slow motion speed
• Forward or reverse at real-time speed
• Forward or reverse at maximum speed
• Forward or reverse at turbo speed
• Control direction of clip
• Advance or reverse through a previously recorded clip
one frame at a time.
Table 2-1 Front Panel Menu Navigation Controls (Cont’d)
Control button Function
1
2
❘ ❘
Outer jog wheel
(hand controlled)
Inner jog wheel
(finger controlled)