manualshive.com logo in svg

Honeywell HDVR, Reference Manual

Share
Download
Honeywell HDVR Reference Manual Download Page 174

Rev 1.00

156

Document 900.0261

04/05

Pan, Tilt, Zoom (PTZ)

Controlling PTZ Camera Operation

To operate PTZ control from the HRDV front panel:

1.

Select and display any one of your cameras that is PTZ capable.

2.

The selected camera will appear full screen on the main monitor output. If the camera 
has communicated with the HRDV and is a supported PTZ type, an asterisk will 
appear next to the camera number on the video monitor.

3.

Press 

FUNCTION

 + 

Camera 3 

to display the PTZ control menu.

Use the following table to navigate through the PTZ control menus, using the front panel 
control buttons, just as you would in Program mode.

Enter

 manual PTZ control

Field Description

PTZ

Indicates this is a Pan, Tilt, Zoom control camera.

Preset/Pattern

Preset

. Use this option to set or recall (1 to 100) specific views.

Pattern

. Use this option to store or execute (1 to 3) viewing patterns for the 

camera.

1 to 100 (Preset)/
1 to 3 (Pattern)

Select Preset or Pattern camera view to store, set, recall, or execute.

Summary of Contents for HDVR















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands