Honeywell HD54IP, User Manual

Page: 54 / 84

54
IP Camera Web Client
Primary Stream Video Codec Settings
Figure 4-8 Primary Stream Video Codec Settings Available Functions
Secondary Stream Video Codec Settings
Figure 4-9 Secondary Stream Video Codec Settings Available Functions
Configuring the Compression Settings
1. On the Compression Settings tab, in the Statistics area, select the Received check
box to receive in real time the bit rate and frame rates for the current image.
Deselecting the check box disables the refresh rate.
Note The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
Set the Resolution
Set the Frame Rate
Set the Priority for Quality, or Bit or Frame Rate
Set the Compression Ratio
Set the Target Bit Rate
Set the Maximum Bit Rate (kbps)
Set the Key Frame Interval
Default settings shown for NTSC models
Set the Resolution
Set the Frame Rate
Set the Priority for Quality, or Bit or Frame Rate
Set the Compression Ratio
Set the Target Bit Rate
Set the Maximum Bit Rate (kbps)
Default settings shown for NTSC models