Honeywell HD54IP, User Manual

Page: 27 / 84

Performance Series Rugged Day/Night H.264 IP Dome Camera User Guide
Document 800-09311V3 Rev A 27
07/2013
Caution Adjust the camera field of view only by moving the gimbal. Do not
move the camera lens to adjust the camera field of view as this might
result in irreparable damage.
Figure 2-6 Gimbal Adjustment
Adjusting the Lens Focus
Lenses are pre-focused at the factory. They might require a final adjustment after
installation in the unlikely event the optical effect of the dome bubble causes a slight
defocusing of the lens.
TECH TIP! To check the focus, hold the dome bubble over the lens while making any adjustments.
Legend
A = Tilt rotation
B = Horizontal rotation
C = Pan rotation
Angle view
Top view
B
C
A
Setscrew (loosen to
adjust horizontal
rotation)
Loosen locking screw
(inside conduit entry)
to remove the side
conduit plug.
Set focus
(top)
Set focal length
(bottom)
Local video out
Factory reset
button