Honeywell HD4DIR, User Manual

Page: 24 / 32

24
Figure 12 Sync. Control Setup
Motion Detection Setup
Set up to four areas of the screen to detect moving objects. When the camera detects motion, the
screen displays
MOTION DETECTED
along with the number of movements counted.
Figure 13 Motion Detection Setup
Menu Item Description
INTERNAL When Line-Lock is not required.
LINE-LOCK Adjust the vertical phase (VPH): 000–359 (factory default is 0)
RETURN Press MENU to return to the SETUP MENU.
Menu Item Option Description
AREA SEL AREA 1
AREA 2
AREA 3
AREA 4 Select which of the four motion detection grids (top left, top right,
bottom left, bottom right) you would like to modify.
<SYNC. CONTROL>
SYNC INT (L/L)
MOTION DETECTION
AREA SEL AREA 1
AREA STATE ON
TOP |..|................| 10
DOWN |........|..........| 25
LEFT |...|...............| 20
RIGHT |........|..........| 40
Press SET to Return