Honeywell HD4DIR, User Manual

Page: 13 / 32

Document 800-01529 Rev A 13
02/08
Figure 4 4S Electrical Box Installation
Note Honeywell recommends that you orient the conduit plug facing downwards
(wall mount installations) to prevent moisture from entering the housing.
Figure 5 illustrates how to mount the HD4DIR directly to a double gang or single gang electrical box.
Electrical box
(not supplied)
Adapter plate
(use is optional)
HD4DIR base
Secure the optional
adapter plate to the
4S electrical box
using appropriate
screws (not supplied)
Secure the HD4DIR base
with screws appropriate to
your installation (supplied)
For surface mount
installations (without an
electrical box), use
#6-1 7/16 inch slotted Type
A screws (x4) supplied
Ceiling/wall