16
Figure 1-2
Assign IP Address
3.
Assign a fixed IP address to the camera.
4.
Verify that the correct Subnet Mask and Gateway are used. If necessary, consult
your network administrator for assistance.
Note
If you select Obtain an IP address automatically via DHCP, the camera will
need to be rebooted.
Assigning a Camera Name, Time Zone, or Sync System
To assign a camera name, time zone, or sync system to a detected network camera:
1.
Launch HCXFinder. All detected network cameras are listed (see
2.
Highlight a camera in the list, then click Edit.
Figure 1-3
Camera Settings
3.
Type in a desired name for the camera in the Name field.
4.
In the Timezone drop-down list, select the time zone where the camera is located.
5.
In the Analog Output drop-down list, select either NTSC (default), or PAL.
6.
Click Apply.
