background image

Document 800-01123 Rev  B

9

02/08

3.

Secure the power leads by retightening the terminal 
screws until snug.

4.

Plug the power supply into an appropriate power 
source. The power LED illuminates to show that the 
camera is receiving power. If it does not illuminate, 
check the removable terminal block connections and 
the power source.

Mounting the Camera

Mounting points are provided on the top and bottom of the 
camera and are used to mount the camera on a bracket or 
tripod. They are designed to accept standard sized 
mounting bolts. The mounting bracket must be capable of 
supporting the weight of the camera and its lens. 

Caution

Some installation codes dictate that the 
mounting bracket must be capable of 
supporting up to four times the combined weight 
of the camera and lens.

Making Final Adjustments

Adjust the focus in your field of view; that is, until you see a 
clear image. If necessary, adjust the brightness using the 
OSD menu controls (see 

 ”LENS DC/Brightness’

 

- DC/

BRIGHTNESS

 or

 ”AGC (Automatic Gain Control) DC/Brightness’

 on 

page 12

). Confirm the exposure on the monitor screen. 

Summary of Contents for HCS544

























Reviews: