62
IP Camera Web Client
Note
If you select 1920 x 1080p resolution for the primary stream for your
HCD5HIH(X) camera, you can select all the resolutions except 720p for your
secondary stream. If you select 1280 x 720p resolution for the primary stream
for your HCD5HIH(X) camera, you can select all the resolutions except 1080p
for your secondary stream. See
Configuring the Compression Settings
Primary Stream Video Codec Settings
Figure 4-25
Primary Stream Video Codec Settings
Secondary Stream Video Codec Settings
Click on the Secondary Stream tab. A warning message appears:
The secondary
stream is disabled. To enable, select compression settings tab and
configure secondary stream.
(HCD5HIH(X) only)
You will have access to the Secondary Stream Video Codec Settings.
Set the
Resolution
Set the
Frame Rate
Set the
Priority
to Quality, or Bit or Frame Rate
Set the
Compression Ratio
Set the
Target Bit Rate
Set the
Maximum Bit Rate
(kbps)
Set the
GOP
(Group of Pictures)
Default settings shown for NTSC models
Summary of Contents for HCD5HIH
