Honeywell HBD2FR1, User Manual

Page: 45 / 82

Setting Up the Camera | 45
800-13338 - A - 03/2013
Figure 4-8 Camera Setup View
Basic Camera Setup Process
1. Aim and focus the camera locally (see
Setting Focus and Zoom
on page 24).
2. Create a typical scene. Add the motion, scene complexity, and lighting levels (day or
night) expected in normal operation.
3. Log in to the web client, and then click Setup .
4. Click Camera Setup , and then adjust the image parameters under Auto Exposure ,
Day/Night , and White Balance to achieve the desired exposure and white balance.
5. Click Compression Setup , and then select the Statistics check box at the bottom of the
screen (available in Internet Explorer only).
6. In Compression Setup , under Primary , set the resolution, frame rate, and priority mode
( Quality , Bit Rate , or Frame Rate ).
7. Is the delivered picture quality, bit rate, and frame rate acceptable with the appropriate
motion, scene complexity, and day/night transitions?
•
Yes - Camera setup is complete.
• No - Additional configuration is required (see below).
If the delivered bit rate is close to the
maximum bit rate, can you increase the
maximum bit rate value? Yes - Increase the
maximum bit rate. No - Set the compression
ratio to
High or Maximum .
Can you increase the target bit rate value? Yes - Increase the
target bit rate. No - Reduce the resolution
and/ or frame rate.