CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
Information for general use
Rev. M / 73023639
155
GasLab Q2
In addition, all devices for which a connection has been established during the current enSuite
session are listed under the
Connections
branch. These entries are retained until enSuite is closed,
even if the respective connection is disconnected.
If you make any changes to the network settings on a device to which a connection
has already been established via enSuite, when you attempt to make the new
connection, you will be asked whether you wish to save these changed settings.
Click on “Yes” in
this case.
The individual devices are identified in the enSuite database via their serial number (ID). In addition,
an individual name can be added to the serial number.
To add an individual name to this
device ID
,
highlight device and select
Properties
in the context menu. Then enter the name in the dialog. Example:
Adding an individual device name.
Figure 8.11: Context menu and properties (enSuite window)
As soon as the connection is established, you can and should
read out the parameterize of the device, more information in the next sections.
All the steps to make device connection
are explained in detail in the “
enSuite online help
”. Follow these instructions.