Configuring the intrusion detection unit
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
27
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Map inputs to intrusion detection areas
By default, when you receive events from the control panel in Security Desk, you are only told
which input triggered the event. For example, if an area is
master armed
and an intrusion event
occurs, you will only know which input triggered the event. To know
where
the input is located,
you need to map the inputs to intrusion detection areas (groups).
Before you begin:
Activate the inputs and the intrusion detection areas to monitor in the
intrusion detection unit
Properties
tab. See
"Configure intrusion detection unit properties"
1
From the
Intrusion detection
task in Config Tool, select the intrusion detection unit to
configure, and click the
Peripherals
tab.
