90 |
P a g e
MAINTENANCE
•
It is recommended that a qualified service technician perform a routine inspection at the beginning of each heating season.
•
Disconnect power before attempting maintenance or repair of the fireplace.
•
Installation and maintenance must be performed by an authorized qualified installer, service agency or gas supplier.
•
Any safety screen or guard removed for servicing placed back before operating this appliance.
•
DO NOT USE this appliance if any part has been under water. Immediately call a qualified service technician to inspect
the unit and to replace any part of the control system and any gas valve that has been under water or impacted.
•
Any alteration to the product that causes soot or carbon to form and results in damage is not the responsibility of the
manufacturer.
•
Do not modify or substitute any part of this appliance.
•
Inspect the external vent cap on a regular basis to make sure that no debris, plants, trees, or shrubs are interfering with the
air flow.
•
Do not operate the fireplace without the fireplace glass.
•
It is imperative that control compartments, screens, or fans system for double glass be kept clean and free of obstructions.
These areas provide the air necessary for safe operation.
•
Light the heater using the built-in igniter. Do not use matches or any other external device to light your heater.
•
Never remove, replace, modify, or substitute any part of the heater unless instructions are given in this manual. All other
work must be done by a trained technician. Do not modify or replace orifices.
WARNING!