Honeywell F115A1064 Product Data Download Page 3

MOUNTED MEDIA AIR CLEANERS

3

68-0201—05

Fig. 2. Choose location for air cleaners.

IMPORTANT

When selecting a location, make sure the air 
cleaner is secured to ceiling load-bearing supports 
or joists. If installing on a T-grid drop ceiling, 
secure the air cleaner to the true ceiling.

INSTALLATION

When Installing this Product…

1.

Read these instructions carefully. Failure to follow 
them could damage the product or cause a hazard-
ous condition.

2.

Check the ratings given in the instructions and on 
the product to make sure the product is suitable for 
your application.

3.

Installer must be a trained, experienced service 
technician.

4.

After installation is complete, check out product 
operation as provided in these instructions.

CAUTION

Electrical Shock Hazard.
Power source can shock.

• Do not connect the power source until after the 

air cleaner is mounted. This will prevent 
electrical shock or equipment damage.

• Be sure to turn off the air cleaner before 

servicing it.

• If the air cleaner must be turned on for an 

electrical check, be extremely cautious.

• Be cautious when working near the moving 

parts of the air cleaner.

DISCHARGE AIR FLOW IN ANY DIRECTION IS ACCEPTABLE.

1

1

MEDIA AIR

CLEANER

AIR SPACE

TO BE

CLEANED

M11694A

Summary of Contents for F115A1064









Reviews: