EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A
39
07/11
Displaying Sectors and Presets
If you have programmed sectors and presets, you can show the current sector
and/or preset on the screen.
To show/hide the sector name:
1.
From the OSD main menu, press
2
to select
Display Options
.
2.
Press
2
to turn the sector name
ON
or
OFF
(default).
Note
If the dome has overlapping sectors displaying at the same time, the
two sector names alternate on the screen at 1.5 second intervals.
To change where the sector name appears on the screen:
1.
From the OSD main menu, press
2
to select
Display Options
.
2.
Press
7
to select
Change Sector Name Loc.
3.
Use the up and down arrow keys on the keyboard to position the sector
name on the screen and then press
ENTER
when done.
To show/hide the preset name:
1.
From the OSD main menu, press
2
to select
Display Options
.
2.
Press
3
to turn the preset names
ON
or
OFF
(default).
Displaying the Zoom Magnification
You can show the camera’s current digital zoom magnification level on the
screen.
To show/hide the digital zoom magnification:
1.
From the OSD main menu, press
2
to select
Display Options
.
2.
Press
4
to turn the digital zoom magnification
ON
or
OFF
(default).
Summary of Contents for EQUIP Series
