Honeywell equIP HFD6GR1, User Manual

Page: 44 / 112

www.honeywell.com/security
44 | equIP® Series 30x Zoom WDR PTZ Camera User Guide
Zoom and Focus
In the ZoomFocus area, you can set the zoom and focus
settings.
Set Digital Zoom to ON or OFF .
Drag the Zoom Speed slider left or right to decrease or
increase the optical zoom speed. Click the – and + signs to
make fine adjustments.
Set Focus Mode to Auto , PTZ Trigger , Manual , or
ZoomTrigger .
Set Focus Limit to Auto or to a value between 10cm and 200m+ . In Auto mode, the camera
will automatically adjust the focus limit based on the zoom ratio. Otherwise, the camera will
only focus on objects beyond the specified distance. For example, if the focus limit is set to
5m , the camera will only focus on objects farther than 5 meters away.
Set Sensitivity to High , Default , or Low . The higher the value, the more quickly the objects in
the scene will come into focus.
If the lens sticks or fails to hold a sharp focus, click Lens Init to initialize (reset) the lens.
Click Save to apply the settings.
Defog
To enable the defog function, set Mode to OFF ,
Manual , or Auto .
If Mode is set to Manual , set Intensity to Low , Medium , or High .
Click Save to apply the settings.
Auto Focus is adjusted automatically when the scene changes.
PTZ Trigger Focus is adjusted automatically after pan/tilt/zoom functions.
Manual Focus is adjusted manually by the user.
ZoomTrigger Focus is adjusted automatically after zoom functions only.
Auto The defog function is enabled
automatically when the scene is obscured
by fog or haze.
Manual The defog function is always enabled.