Honeywell EQUIP HD4DIP, Reference Manual, Page: 73 / 82

Document 800-04191 Rev A 73
06/09
C
Specifications
Note These specifications refer to all models, except where otherwise noted.
Specifications are subject to change without notice.
Video Signal Specifications NTSC PAL
Video Standard: High Res
Scanning System: 525/60 lines (NTSC)
625/50 lines (PAL)
Image Sensor: 1/3” CCD
Minimum Illumination:
(AGC on, 50 IRE) 0.6 lux color/0.4 lux BW
Horizontal Resolution: 540 TVL
Video Output: 1.0 Vp-p @ 75 Ohms (test only)
S/N Ratio: 50 dB or more (AGC Off)
Auto Gain Control (AGC): Off/On, selectable
Auto Electronic Shutter (ELC): 1/60–1/100,000 sec (NTSC)
1/50–1/100,000 sec (PAL)
Lens Iris Control: Direct Drive (DC)
White Balance (AWB): ATW, User Fixed, AWC (Auto or Manual), Fluorescent,
MWB (Manual Mode), Indoor, Outdoor
Lens Type: 2.8 mm to 10.0 mm Vari-focal Auto Iris, F1.3
Focal Length: f = 2.8 mm to 10 mm
Gamma: 0.45
Back Light Compensation
(BLC): Off/On, selectable (Low, Mid, High)
Flickerless: Off/On, switchable
Electrical Specifications
Input Voltage: 12 VDC/24 VAC, PoE IEEE 802.3af
Input Voltage Range: 11–16 VDC, 17–28 VAC
Surge Suppression 1.5 kW transient
Power Consumption: 8 W (max)