manualshive.com logo in svg

Honeywell EQUIP HD4DIP, Reference Manual, Page: 17 / 82

Share
Download
Honeywell EQUIP HD4DIP Reference Manual Download Page 17

Document 800-04191 Rev A

17

06/09

2

Installation and Setup

This chapter describes how to:

•

Mount the camera

•

Adjust the camera for the clearest image

•

Set up the camera in a network system

Before You Begin

Before you install your HD4DIP(X) Network Camera:

•

Please read this guide carefully. Keep this guide for future reference.

•

Honeywell recommends that you check 

www.honeywellvideo.com/products/cameras/

 to find your camera and download 

the latest manuals and software updates.

Unpack Everything

Check that the items received match those listed on the order form and packing slip. The 
HD4DIP(X) packing box should include, in addition to this User Guide:

•

One fully-assembled HD4DIP(X) camera, including factory-installed pigtail power 
and video connections

•

One HD4DIP(X) hardware kit

•

One bag containing mounting screws 

•

One mounting template 

•

One product warranty

•

One CD containing the software

If any parts are missing or damaged, contact the dealer you purchased the camera from 
or call Honeywell Customer Service (see 

Warranty and Service

).

Summary of Contents for EQUIP HD4DIP



















































































Reviews:

No comments