Honeywell EQUIP HD3HDIHX, User Manual, Page: 81 / 116

HD3 equIP
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361V5 Rev A 81
07/2013
Configuring Camera Field of View Change Detection
The web client application can detect tampering of the camera field of view and show an
alarm message above the video display (see
Figure 4-36 ).
Note Before changing the current Scene Change settings, you must click Reset
Scene .
Note Camera Field of View change detection works best detecting objects with sharp
edges and/or corners. Environments that are flat and/or monochrome might
trigger false alarms.
To detect a change in the camera field of view:
1. Click the Video Analytics tab.
2. In the Scene Change Threshold list, select one of the following options:
3. Click Apply .
Note To turn off camera field of view change detection, select Disable in the Scene
Change Threshold list. Disable is the default value.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply .
Table 4-14 Scene Change Threshold Values
Value To detect …
High (80%) Maximum change in the camera field of view. The alarm
message appears when there is at least an 80% change in
your camera field of view.
Medium (50%) Medium change in the camera field of view. The alarm
message appears when there is at least a 50% change in
your camera field of view.
Low (30%) Minimum change in the camera field of view. The alarm
message appears when there is at least a 30% change in
your camera field of view.