manualshive.com logo in svg

Honeywell EQUIP HD3HDIHX, User Manual, Page: 76 / 116

Share
Download
Honeywell EQUIP HD3HDIHX User Manual Download Page 76

76

IP Camera Web Client

Note

You must click 

Apply

 after you make changes to any settings to save those 

changes. Settings are not saved unless you click 

Apply

.

Zoom & Focus (HD3HDIH(X) model only)

For your convenience, your HD3HDIH(X) camera allows you to remotely adjust the zoom 
and focus. 

Table 4-11

White Balance Settings 

Option

Description

AWC Auto (Auto White 
Balance Control Mode)

An automatic white balance mode that can be used in 
scenes which do not have constant lighting. 

MWB (Manual Mode)

Manual white balance mode. Set the Red and Blue gains 
from 0–255.

AWC Push (Auto White 
Balance Control Mode)

Automatically adjust the white balance to your specific 
environment. When selected, the white balance is locked. 
The user can optimize WB for the given scene by pressing 
and holding an adjustment button. 

Note

This setting is recommended for situations in which 
the light conditions are constant, so that the 
specified color temperature does not change. 

Summary of Contents for EQUIP HD3HDIHX





















































































































Reviews:

No comments