Honeywell EQUIP HD3HDIHX, User Manual, Page: 67 / 116

HD3 equIP
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361V5 Rev A 67
07/2013
Compression Settings
The video signal sent from the camera to the web client has a number of settings that can
be edited which affect how the video displays in the web client. The Compression Settings
tab enables you to configure these settings:
• Stream Type
• Enable / Disable the Secondary Stream (Secondary stream only)
• Resolution
• Frame Rate
• Priority ( Quality , Bit Rate , or Frame Rate ) (Frame Rate available for primary stream
only)
• Compression Ratio (if Quality is chosen as the priority)
• Target Bit Rate (if Bit Rate or Frame Rate is chosen as the priority)
• Maximum Bit Rate that the camera will provide across the network (if Quality is
chosen as the priority)
• GOP (number of frames) / Key Frames
Figure 4-25 Compressions Settings Tab: Primary Stream
Your HD3 series camera supports simultaneous video streams. The Primary stream
delivers H.264-compressed video up to 30 fps at 1080p, 720p or other resolutions,
dependent on different models. The Secondary stream delivers MJPEG-compressed video
up to 30 fps at 640 x 360 resolution or H.264-compressed video up to 30 fps at 1080p, 720p
or other resolutions, dependent on different models.