38
IP Camera Web-Client
closed) changes. The LAMP setting allows control of the moving IR cut filter and day/night
operation to be synchronized with a common controller. See
for more information.
Connect external devices such as sirens or flashing lights to the alarm output connector to
signal users of the camera that an alarm is activated. Set the Alarm Output as Normally
Open or Normally Close. The camera triggers the alarm output only when the normal state
(open or closed) changes. See
for more information.
When an alarm input event is detected, an alarm message appears on the Web-Client
screen (see
) to notify the operator.
Note
You must click Apply for your changes to take effect. If you close the screen
before clicking Apply, all your new settings will be lost.
Figure 4-7
Device Settings
