Device Configuration and Commissioning
7
Page 100 of 120
Operating Instructions
enCore FC
This function is available in normal mode during online parametrization only.
Requirement is that the calibration switch is open. Depending on the action
you want to execute, you need the user right
Erase fiscal audit trail/fiscal
archives
and/or the rights for the individual counters on parameter level.
Call:
<Stream 1/Stream 2>
, tab
End of commissioning
7.2.7 Sealing (if necessary)
It may be necessary for the device as well as sensor and signal lines to be
sealed by a metrology expert when it is used within the scope of legal metro-
logy. The conditions of the applicable authorization must be observed in this
case.
