manualshive.com logo in svg

Honeywell Dolphin CT60, User Manual

Share
Download
Honeywell Dolphin CT60 User Manual Download Page 13

CHAPTER

1

Dolphin CT60/CT60 XP Mobile Computer User Guide

1

ABOUT THE COMPUTER FEATURES

This chapter introduces the Dolphin CT60/CT60 XP mobile computer series. Use 
this chapter to learn about the basic computer features, functions, and 
accessories.

Note:

Throughout this manual, all versions of the mobile computer are referred to as the 
CT60 unless information is specific to a particular model. The device applications 
and settings vary by computer model and OS version. Your computer may not include 
all the features shown in the manual.

About the Dolphin CT60 Mobile Computer

Dolphin CT60 mobile computers, built on the Mobility Edge™ platform, deliver real-
time connectivity, advanced data capture, and future-proof investment protection. 
All CT60 models come equipped for fast Wi-Fi connectivity with a WLAN 802.11 a/
b/g/n/ac radio and Bluetooth (v5.0) technology that includes Bluetooth Low 
Energy (BLE) support. CT60L1N models provide additional connectivity with a 
wireless WWAN radio for high speed data and quality voice support across all 
network technologies. CT60 WWAN models also include an integrated global 
positioning satellite (GPS) receiver that supports GPS protocols including, 
Simultaneous GNSS Receiver Support for GPS, GLONASS, Galileo and Beidou GPS. 

Honeywell also offers CT60 models for use in hazardous environments.

Model Overview 

:

Standard Feature

Model 
CT60L0N

Model 
CT60L1N

Android operating system

x

x

2.2 GHz Qualcomm Snapdragon™ 660 octacore processor

x

x

3 GB/4 GB DDR4 RAM, 32 GB flash memory

x

x

Large, high definition, bright color, outdoor-readable display with 
responsive multi-touch capacitive touch panel. Automatic switching 
between glove and finger modes.

x

x

Summary of Contents for Dolphin CT60





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands