Honeywell Dolphin 75e User Manual Download

Page: 26 / 124

1 - 14

To perform a

Factory Reset

if your touchscreen is unresponsive and all other recovery methods have failed:

1. Press and hold the

Volume Down

and

Power

buttons simultaneously until a large exclamation mark appears on the

screen.

2. Press the following buttons in this order:

Volume Up

Volume Down

Power

Volume Down

3. Once the terminal resets, the set up Welcome screen appears. For more information, see

Power On and Set Up the

Terminal

on page

1-4.

Connecting the Terminal to a Computer (PC) via a USB Connection

You can transfer files (e.g., pictures, music, and videos) between your computer and the terminal using the supplied USB
Charge/Communication cable or a Dolphin 70e Black HomeBase with a standard USB cable.

Note: The terminal supports Hi-Speed USB communication (USB 2.0) with a maximum data transfer rate of 480 Mbps.

Using the Windows Phone App to Connect

1. Connect the terminal to the PC using the USB charge/communication cable supplied.

If you are using Windows® 8, the Windows Phone® app automatically opens on the PC. If you are using Windows 7 or
Mac, go to

www.windowsphone.com

to download and install the Windows Phone app for desktop or Mac.

2. In the Windows Phone app, set your phone name and sync preferences.

The default phone name is “Windows Embedded Handheld”. You can always modify your preferences later by selecting

Settings

in the upper right corner of the app screen.

Using File Explorer or Windows Explorer to Transfer Files

To move files between your Dolphin terminal and PC without using the app:

1. Connect the terminal to the PC using the USB charge/communication cable supplied.

2. Depending on the Windows operating system either open

File Explorer

Windows Explorer

3. Under

Computer

, click on

Windows Embedded Handheld

Phone

4. You can now copy, delete and/or move files or folders between the computer and the terminal or the an microSD card

installed in the terminal as you would with any other storage drive (e.g., cut and paste or drag and drop).

USB Port

USB Door

Micro USB Port

Right Side Panel
of the Terminal

USB Charge/Communication Cable

Summary of Contents for Dolphin 75e





























































































































Search results

Summary of Contents for Dolphin 75e

Reviews:

Related manuals for Dolphin 75e

Brands by name

Popular brands

Honeywell Dolphin 75e, User Manual

Search results

Summary of Contents for Dolphin 75e

Reviews:

Related manuals for Dolphin 75e

Brands by name

Popular brands