manualshive.com logo in svg

Honeywell Dolphin 75e, User Manual

Share
Download
Honeywell Dolphin 75e User Manual Download Page 111

11 - 3

Back Panel

Power Supply Connector

This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this 
connector.

Bottom Panel

For details on how to mount the base, see 

Mounting the ChargeBase

 on page 

11-4.

Power

The terminal requires 12 Volts DC input for battery charging and power output to the terminal. The power adapter included with 
the base, converts the voltage from the AC power source to 12 volts DC. 

Use only a UL Listed power supply, which has been 

qualified by Honeywell with output rated at 12VDC and 5 amps with the device.

 The operating temperature range is -10° to 

50°C (14° to 122°F).

Honeywell recommends that you leave the ChargeBase connected to its power source at all times, so that it is always ready to 

use. 

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell 
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Power Supply Connector

Serial Number Label

Compliance Label

!

Summary of Contents for Dolphin 75e





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands