Honeywell Dolphin 6110 User Manual Download Page 63

Page: 63 / 114

7 - 19

SIP Configuration

The SIP Config settings screen enables you to configure Session Initiation Protocol (SIP) for Voice Over
IP (V0IP) and Telephony communication.

To access the SIP Config screens, tap Tap

Settings

System

SIP Config

Text Size Screen

The Text Size screen enables you to perform font scaling within
certain views of the:
• Home screen,
• Contacts,
• Calendar,
• Messaging, and
• Tasks.

Font scaling means that you can increase or decrease the
point size of the font on application windows.

To change the font size, move the slider toward

Smallest

Largest

. The Example text changes to reflect the font change.

Tap

to save the new font size setting.

Summary of Contents for Dolphin 6110



















































































































Search results

Summary of Contents for Dolphin 6110

Reviews:

Related manuals for Dolphin 6110

Brands by name

Popular brands

Honeywell Dolphin 6110, User Manual

Search results

Summary of Contents for Dolphin 6110

Reviews:

Related manuals for Dolphin 6110

Brands by name

Popular brands