56
Operation
6.3.2
Button functions
The pressure and arrow buttons have the following functions:
Button
Function
– Jump right to another data list.
– Jump to the second part of a two-part value.
– Jump down through a data list.
– Jump left to another data list.
– Jump up through a data list.
ENTER
– Depending on the respective data class, you can:
Activate the input mode.
Open the respective sub-menu.
Update the corresponding measurement.
ESC
– Depending on the respective data class, you can:
Leave a sub-menu and jump to its entry value (one menu
level up).
Cancel an entry (when in input mode).
+
– By pressing both of the buttons at the same time:
Display the "Main" register.
You can set a value in input mode (reset to start value)
+
– Address display of the current value.
– By pressing the function key, you can:
Display the "Main" register.
Freeze the current display.
Delete the status register.
Summary of Contents for DL230
