background image

DG..T · Edition 01.22

EN-6

10.4 electrical data

Safety class: 1.
Switching capacity:

U

cos φ  

= 1 [A]

cos φ  

= 0.6 [A]

DG..T

max. 240 V AC

max. 5

max. 0.5

DG..TG* < 30 V AC/DC

max. 0.1 max. 0.05

* With gold contacts

Cable diameter: AWG 24 to AWG 13 (0.02 to 0.07" 
(0.5 to 1.8 mm)).
Line entrance: ½" NPT conduit.
Electrical connection type: screw terminals.

11 CeRtIFICAtIon

11.1 China RoHs

Directive on the restriction of the use of hazardous sub-
stances (RoHS) in China. Scan of the Disclosure Table 
China RoHS2, see certificates at www.docuthek.com. 

FM approved

Factory Mutual Research Klasse: 3510 Flow and pres-
sure safety switches. Designed for applications pursu-
ant to NFPA 85 and NFPA 86. www.approvalguide.com 

UL listed

Underwriters Laboratories – UL 353 „Limit Controls“, 
MH 64186.  www.ul.com 

12 LoGIstICs

transport

Protect the unit from external forces (blows, shocks, 
vibration).

Transport temperature: see page 5 (10 Technical 

data). 

Transport is subject to the ambient conditions de-

scribed.
Report any transport damage on the unit or packaging 
without delay.
Check that the delivery is complete. 

storage

Storage temperature: see page 5 (10 Technical 
data).
 
Storage is subject to the ambient conditions described.
Storage time: 6 months in the original packaging before 
using for the first time. If stored for longer than this, the 
overall service life will be reduced by the corresponding 
amount of extra storage time.

13 DIsPosAL

Devices with electronic components:

Weee Directive 2012/19/eU – Waste electrical 
and electronic equipment Directive

 

At the end of the product life (number of op-

erating cycles reached), dispose of the pack-
aging and product in a corresponding recycling 
centre. Do not dispose of the unit with the usu-
al domestic refuse. Do not burn the product.  
On request, old units may be returned carriage paid 
to the manufacturer in accordance with the relevant 
waste legislation requirements. 

© 2022 Elster GmbH 

We reserve the right to make technical modifications in the interests of progress.

The Honeywell Thermal Solutions family of products includes 

Honeywell Combustion Safety, Eclipse, Exothermics, Hauck, 

Kromschröder and Maxon. To learn more about our products, visit 

ThermalSolutions.honeywell.com or contact your Honeywell Sales 

Engineer.  

Elster GmbH  

Strotheweg 1, D-49504 Lotte  

T +49 541 1214-0  

[email protected]  

www.kromschroeder.com  

 

Global centralized service deployment coordination:  

T +49 541 1214-365 or -555 

[email protected] 

Translation from the German

FoR MoRe InFoRMAtIon

Summary of Contents for DG-T Series







Reviews: