Honeywell DACT-E3 Product Installation Document Download Page 14

Page: 14 / 14

Honeywell Gamewell-FCI

12 Clintonville Road

Northford, CT 06472-1610

203.484.7161

www.gamewell-fci.com

9000-0581 | J6 | 06/20
©2020 Honeywell International Inc.

Section 5: Reference Documentation

Table 5.1 lists the UL-Controlled documentation assigned to the S3 Series and E3 Series Systems. If you require detailed installation instructions

on cabinetry, wiring and specifications, you can download the following UL-Controlled documents from the ESD site on the Gamewell-FCI
Website (www.gamewell-fci-esd.com).

Part Number

Title

UL Listing Document

LS10005-051GF-E

S3 Series (Small Addressable Fire Alarm Control Panel) UL Listing Document

LS10080-051GF-E

E3 Series Fire System (Expandable Emergency Evacuation System) UL Listing Document

Manuals

9000-0575

E3 Series Broadband Installation/Operation Manual

9000-0577

E3 Series Classic Installation/Operation Manual

LS10013-000GF-E

E3 Series Combined Fire and MNS Installation/Operation Manual

LS10138-151GF-E

E3 Series Releasing System Supplement

Installation Instructions

9000-0491

LCD-7100 (Remote Serial Annunciator) Installation Instructions

9000-0544

AM-50 Series (50 Watt Amplifiers) Installation Instructions

9000-0545

INX, INX-CAB-B, INX-CAB-C, and INX-CAB-D Network Audio Transponder Enclosures Instructions

9000-0546

INCC (Intelligent Network Interface) Installation Instructions

9000-0548

PM-9 (Power Supply) Installation Instructions

9000-0549

INI-VG Series (Intelligent Network Interface) Installation Instructions

9000-0550

ASM-16 (Addressable Switch Module) Installation Instructions

9000-0564

ANU-48 (Remote LED Driver Annunciator) Installation Instructions

9000-0568

NGA (Network Graphic Annunciator) Installation Instructions

9000-0569

ILI-S-E3 (Intelligent Loop Interface - Expansion Board) Installation Instructions

9000-0579

ILI-MB-E3 (Intelligent Loop Interface - Main Board) Installation Instructions

9000-0580

RPT-E3-UTP (Repeater-E3 Unshielded Twisted-Pair) Installation Instructions

9000-0582

LCD-E3 (Liquid Crystal Display-E3) Installation Instructions

9001-0017

ILI95-MB-E3 (Intelligent Loop Interface-95 - Main Board) Installation Instructions

9001-0018

ILI95-S-E3 (Intelligent Loop Interface-95 - Expansion Board) Installation Instructions

9001-0055

PM-9G (Power Supply) Installation Instructions

9001-0064

ANX (Addressable Node Expander) Installation Instructions

9001-0065

E3BB-FLUSH-LCD-CAB A2 Remote Flush Annunciator Installation Instructions

9001-0066

RAN-7100 (Remote Alphanumeric Annunciator) Installation Instructions

LS10044-000GF-E

SLC-PM/SLC95-PM Installation Instructions

LS10045-000GF-E

LCD-SLP (Liquid Crystal Display-Smart Loop Panel) Installation Instructions

LS10046-000GF-E FML-E3/FSL-E3 (Fiber-Optic Multi-Mode/Fiber-Optic Single-Mode) Installation Instructions
LS10058-000GF-E

FLPS-7 (Power Supply) Installation Instructions

LS10082-000GF-E

E3 Series Cabinets B, C, D, Retrofit, DR-C4/DR-D4 and EQ Cabinets Installation Instructions

LS10083-000GF-E

E3 Series, Remote Annunciator Display and Retrofit Cabinets Installation Instructions

LS10218-000GF-E

INI-VG Series (Intelligent Network Transponder-Voice Gateway-Third Generation) Instructions

LS10222-000GF-E

NGA (Network Graphic Annunciator-Second Generation) Installation Instructions

Addendum/Frame and Posts

9000-0427-L8

Compatibility Addendum to Gamewell-FCI Installation/Operation Manuals UL File S1869 Vol. 8C

9000-0583

E3 Series for the LCD-E3 Operating Instructions

LS10056-000GF-E

S3 Series (Small Addressable Fire Alarm Control Panel System), Operating Instructions

LS10121-000GF-E

E3 Series for the LCD-SLP Operating Instructions

Table 5.1 Reference Documents

Summary of Contents for DACT-E3















Search results

Summary of Contents for DACT-E3

Reviews:

Related manuals for DACT-E3

Brands by name

Popular brands

Honeywell DACT-E3, Product Installation Document

Search results

Summary of Contents for DACT-E3

Reviews:

Related manuals for DACT-E3

Brands by name

Popular brands