manualshive.com logo in svg

Honeywell CT50, User Manual, Page: 52 / 96

Share
Download
Honeywell CT50 User Manual Download Page 52

Chapter 3 — About the Scanner

42

Dolphin CT50 Mobile Computer User Guide

Scan a Bar Code

The scanner has an aiming beam to help you correctly frame bar codes. 
It also supports omni-directional (360°) scanning to make it easier for 
you to scan bar codes.

1

Tap 

All Apps

 > 

Demos

 > 

ScanDemo

.

2

Point the scanner window at the bar code and hold the computer 
steady a few inches from the label.

Notification Settings

Setting

Description

Default

Good Read Notification

Enables or disables a good read notification. 
The notification consists of a green blink of the 
Good Read LED, a short beep, and an optional 
short vibration.

Enabled

Bad Read Notification

Enables or disables notification of a failed scan. 
The notification consists of a red blink of the 
Good Read LED, an error beep, and an optional 
short vibration.

Disabled

Vibrate Enabled

Enables or disables whether the computer 
vibrates when there is a good or bad read.

Disabled

Note:

 Before you start scanning bar codes, use the Settings app to 

enable only the bar code symbologies that you need.

Summary of Contents for CT50

































































































Reviews:

No comments