manualshive.com logo in svg

Honeywell CT45 Series, User Manual

Share
Download
Honeywell CT45 Series User Manual Download Page 59

CT45/CT45 XP Mobile Computer Series User Guide

49

Assigning a SIM to SIM Slot 1

To assign a SIM to SIM Slot 1:

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap 

SIM Selection

 

.

3. Under 

Select New Configs

, tap the arrow 

 next to SIM Slot 1.

4. Select the SIM from the drop-down list. 

5. Click 

APPLY

.

6. A prompt verifies that you want to apply the new configuration. Tap 

OK

.

7. The system indicates that the settings have been saved. Tap 

OK

.

Using Dual SIM Dual Standby Mode

The CT45/CT45 XP allows you to enable a Dual SIM Dual Standby (DSDS) setup 
where both SIMs are provisioned with separate mobile plans. In DSDS, both SIMs 
are active but only one SIM can handle data at a time.

When DSDS mode is turned ON, both SIM Slots are shown. In this mode, SIM Slot 1 
and SIM Slot 2 cannot be modified.

SIM Slots cannot be 
modified in Dual SIM 
Dual Standby mode.

Select the mobile carrier

Turn Dual SIM Dual 
Standby off

Summary of Contents for CT45 Series

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands