manualshive.com logo in svg

Honeywell CT45 Series, User Manual

Share
Download
Honeywell CT45 Series User Manual Download Page 43

CT45/CT45 XP Mobile Computer Series User Guide

33

proprietary settings and provides supplemental access to standard EMM features. 
EMM providers may also make use of generic Android APIs to provide standard 
EMM functionality. 

Honeywell UEMConnect is available for download in the Google Play™ store. 
UEMConnect licenses are included with the purchase of applicable SOTI offerings 
through Honeywell or may be purchased separately for applicable EMM solutions 
not purchased through Honeywell.

Unlock Developer Options

Developer options only appear in the Settings app if you unlock the feature. If you 
are a developer working with the computer, you can easily unlock the additional 
settings to use for testing and debugging applications under development for the 
computer. 

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap 

Settings

  

> 

About phone

.

3. Tap 

Build number

 seven times. A message appears informing you that you are 

now a developer.

4. Open 

Settings

 

> System

 and scroll to the bottom of the list. 

5. Tap 

Advanced.

6. Tap 

Developer options

.

Summary of Contents for CT45 Series

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands