manualshive.com logo in svg

Honeywell CT45 Series, User Manual

Share
Download
Honeywell CT45 Series User Manual Download Page 25

CT45/CT45 XP Mobile Computer Series User Guide

15

Configure the Screen Backlight

The display has an ambient light sensor that automatically adjusts the backlight 
intensity to conserve power and ensure the display is readable. You can also 
manually set the backlight intensity if you do not want to use the automated 
adaptive brightness feature.

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap 

Settings

  

> 

Display

.

3. Choose one of the following options:

•

To have the computer automatically adjust the brightness for your work 
environment, turn On the 

Adaptive brightness

 setting. You can tap 

Adaptive brightness

 to toggle the feature On or Off.

•

To set the brightness level manually, verify the Adaptive brightness feature 
is turned Off, and tap 

Brightness level

. Adjust the slider to set the brightness 

level.

About the Good Read LED

The Scan Status LED indicates the read status of the imager when scanning a 
barcode. When active, the LED illuminates the outer ring of the front speaker. To 
learn more about how to use and configure the imager for scanning, see 

Chapter 3

: 

Use the Imager

 beginning on page 35.

Good Read LED Descriptions

LED Color

Description

Green

Good read of a barcode.

Blinking green

The data collection imager is processing or starting up.

Red

Failure to scan barcode. 
Check to make sure you have the correct symbology enabled.

Good Read LED

Summary of Contents for CT45 Series

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands