manualshive.com logo in svg

Honeywell CN80 Series, User Manual

Share
Download
Honeywell CN80 Series User Manual Download Page 75

CHAPTER

5

CN80 Mobile Computer Series User Guide

65

USE THE CAMERA

Use this chapter to learn how to take pictures and record videos with the color 
camera.

About the Color Camera

The CN80 comes equipped with a 13-megapixel color camera, 4K video with image 
stabilization, and advanced software features for enhanced exposure control for 
taking pictures and videos. The camera lens and flash are located on the back of 
the computer.

Use the Photos app 

 to view photos and videos stored on the CN80. 

By default the photos and videos captured with the Camera app are saved on the 
computer under Internal shared storage\DCIM\Camera.

How to Zoom

The camera zoom is controlled using a pinching motion on the touch screen. Place 
two fingers on the screen at the same time, and then: 

•

spread them apart to zoom in (enlarge and object).

•

pinch them together to zoom out.

Take a Photo

1. Tap the 

Snapdragon

™

 Camera 

icon 

 in the favorites tray on the Home 

screen.

2. Using the screen as a viewfinder, move the computer until you see the image 

you want to capture. The camera lens is located on the back of the computer.

Summary of Contents for CN80 Series





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands