Honeywell CN80 Series User Manual Download Page 12

Page: 12 / 124

CN80 Mobile Computer Series User Guide

Model Overview

Note:

To learn more, see

Specifications,

beginning on page 107.

Available Features

Model
CN80L0N

Model
CN80L1N

Android Operating System

2.2 GHz Qualcomm Snapdragon™ 660 octacore processor

3 GB/4 GB DDR4 RAM, 32 GB flash memory

Large, high definition, bright color, outdoor-readable display with
responsive multi-touch capacitive touch panel

Integrated ambient light sensor, proximity sensor, accelerometer,
gyroscope, magnetometer, and pressure sensors

Choice of physical keypad:

•

40-key QWERTY keypad or

•

23-key numeric function keypad

N6603ER (1D/2D) high performance Honeywell imager

EX20 Near/Far (1D/2D), high performance 2D Honeywell imager for
long range scanning applications; 0.15 m to 15.2 m (6 in to 50 ft).

WLAN IEEE 802.11a/b/g/n/ac radio; Wi-Fi certified

Bluetooth™ V5.0 and Bluetooth Low Energy (BLE) technology support

NFC technology for short-range wireless data exchange

Wireless WWAN radio for high speed data and quality voice support
across all network technologies

Dual micro-SIM slots

Integrated GPS receiver; GPS Supported Protocols: Simultaneous
GNSS Receiver Support for GPS, GLONASS, Galileo, and BeiDou

Mid-tier rugged specifications with IP67 sealing

Customer-accessible microSD™ slot for removable memory cards up
to 512 GB (SDXC/SDHC/SDIO-compliant)

Value-added software components supporting specialized imaging
and OCR functions

13-megapixel color camera, 4K video with image stabilization and
advanced software features for enhanced exposure control

Summary of Contents for CN80 Series





























































































































Search results

Summary of Contents for CN80 Series

Reviews:

Honeywell CN80 Series, User Manual, Page: 12 / 124

Search results

Summary of Contents for CN80 Series

Reviews: