Honeywell CN75 User Manual Download Page 51

Page: 51 / 256

75 Series Mobile Computer User Guide

About Screen Gestures

The Windows Embedded Handheld 6.5 interface supports the use of gestures with
the finger or stylus to move around the screen.

The battery has a low charge.

The battery has a very low charge.

The battery is attached to external power and is charging.

No battery is installed in the computer.

Call forwarding is on.

Voice mail is off.

GPS locator is off.

GPS locator is on.

The

Heater enabled delay

timer has expired and computer is cold enough the

heaters can be turned on. For more information, see

About the CK75 Cold Storage

Model Heater

(page 22).

Heaters are turned on. For more information, see

About the CK75 Cold Storage

Model Heater

(page 22).

Icon

Description

Gesture

Description

Tap

Represents the left click of a mouse.

Double-tap

Represents the left double-click of a mouse.

Hold

Represents the right click of a mouse when you press and hold on the screen and a
context menu appears.

Flick

Initiates scrolling in the direction (horizontal or vertical) the finger or stylus moves
across the screen.

Pan

Press and hold on the screen, and then drag in any direction.

Summary of Contents for CN75

































































































































































































































































Search results

Summary of Contents for CN75

Reviews:

Related manuals for CN75

Brands by name

Popular brands

Honeywell CN75, User Manual

Search results

Summary of Contents for CN75

Reviews:

Related manuals for CN75

Brands by name

Popular brands