Honeywell Centraline FALCON, User Manual, Page: 75 / 276

USER GUIDE FALCON
71 EN2Z-0962GE51 R0715
A user who has a user level equal to or higher than the assigned write access level
of the datapoint, will have this access right enabled in the Excel Web HTML
Interface, all others will not (for further details, please refer to the User
Administration section).
Datapoint Properties Overview
Each point in a controller has associated properties such as datapoint name,
notification class and descriptor. Point properties may not be available for editing in
BACnet front-ends such as the EBI central, or in the Excel Web HTML Interface.
Contrariwise in CAREm, some online properties such as present value, statuses,
etc. are not available in principle.
This chapter contains tables for each point type. The tables list point properties and
presents the following information for each:
•
Property denotation specifies either the attribute name in the related CARE
Datapoint Properties tab and/or in the Excel Web Datapoint Details tabs.
•
Whether or not the property is available for off-line editing . “Off-line” editing
refers to changes made to database values while the controller is not active in
the system. In other words, when you are using CARE to change copies of
controller files, not the files in the actual controller.
•
Whether or not the attribute is available for on-line editing . “On-line” editing
refers to changes made to controller files while the controller is active. For
example, if you are using the Excel Web HTML Interface or a BACnet client to
change field values in a controller while it is operating.
Analog Input
Property Denotation Online-Editing Offline-Editing
Excel Web HTML
Interface
CARE BACnet Excel Web
HTML Interface
BACnet CARE
"Datapoint name displayed
in title line of dialog" Datapoint Name - +
GENERAL
Description Descriptor description - + +
Type “datapoint type” “n.a.” - -
Mapping “n.a.” - -
NV Name "automatically
generated by
CARE" - -
NV type Input NV - +
NV type Output NV - +
Direction Lon Point - +
Read access level Read access level - +
Write access level Write access level - +
ALARMING
Notification class Notification class notification-class - + +
Notify type Notify type notify-type - + +
Event:
To Off-Normal, To Fault,
Back to Normal
“selectable
under Reporting, see
Reporting:
To Off-Normal, To
Fault, Back to
Normal + +